Advance Lube Enterprise
Sdn Bhd

HS(M) 3745, PTD 153751,
Jalan Berjaya 8,
Taman Perindustrian Berjaya,
Kempas Lama, 81200
Johor Bahru, Johor, Malaysia.
+607-554 3000
+607-554 1212

Our Product & Service

SLIDEWAY OIL

SLIDEWAY OIL 32

SLIDEWAY OIL 68

SLIDEWAY OIL 150

RAILROAD 413

   
   

Additive Package 75 (SF,SG,CF,CF4)

ATF Additive Package 3350


Gear Oil Additive Package 4730 (GL4,GL5)


Additive Package 95 (SL,SN)


Throttle Body and Carburetor Cleaner

THROTTLE BODY, AIR INTAKE & CARBURETOR CLEANER SPRAY is a High Performance formulation for effectively removal of oil, dirt, gum, carbon and grease deposits from the surfaces within seconds. It helps to clean fuel & air intake and delivery system. It helps to flush off residues from the surface of throttle plates and butterfly valves, body parts, carburettors & air intake components, PVC valve, EGR (exhaust gas recirculating) valve, choke and other parts. It eliminates the need to remove and dismantle the throttle body or carburettor from the engine. It is harmless to metals and gaskets and will not affect oxygen/lambda sensors or mass airflow sensors on the intake systems. Formulated for modern petrol and diesel vehicles, will not remove protective surface coatings of components. It helps to increase combustion efficiency to save fuel & decrease the emission of toxic pollutants.

Brake and Parts Cleaner

BRAKE & PARTS CLEANER SPRAY is formulated with Mineral hydrocarbon Complex. It is a fast and efficient way to clean and degrease all brake parts; either disc or drum. Cleans brake linings, drums, cylinders, springs, disc brake pads, etc. It comes in aerosol spray for conveniently spray on dirty brake parts to remove oil and grease without disassembling the brake unit. It helps to stop disc brake squeal when caused by contaminants. It helps to dissolve harmful deposits on brake parts.

Chain Lube

AEROSOL CHAIN LUBE SPRAY is a premium quality lubricant made from a high quality mineral based oil filled with anti-wear and tackiness properties. The propellant used is liquefied petroleum gas. The tackiness of the oil provides adhesive properties that increase oil servicing life by helping the lubricant to stick to the surfaces. Aerosol Chain Lube Spray also provides cleansing of the surfaces through its detergent properties.
 
 

ATF CVT FLUID

TRANSMISSION FLUID 30 T0-4

ATF SPIII 1L

ATF T-IV

Group III 8 CST

Group III 6 CST

Group II 500N

Group II 150N

CHAINSAW OIL 68

CHAINSAW OIL 100

CHAINSAW OIL 150

CHAINSAW OIL 220

HFC Refrigeration Oil VG 68

POWER UP Refrigeration Compressor Oils are high performance fully synthetic lubricants specifically designed for the lubrication of refrigeration compressors and systems using ozone-friendly synthetic HFC refrigerants as well as recently developed HFO refrigerants and HFO/HFC blends with lower Global Warming Potential
than HFC's, including A1 and A2L refrigerants as per ASHRAE 34/ISO 817 safety classification.


   
   

Textile Oil

Semi Synthetic Cutting Oil

Soluble Cutting Oil SG1

Soluble Cutting Oil G2

DIESEL HEAVY DUTY CJ4

DIESEL HEAVY DUTY CI4 15W40

DIESEL HEAVY DUTY CF4 15W40

DIESEL HEAVY DUTY CF4 10W40

Neoprene Sealant

Construction Adhesive Sealant

Acrylic Latex Sealant

Non Skinning Sealant

GEAR OIL GL4 75W-80

GEAR OIL GL4 75W-140

GEAR OIL SYN GL4 75W-90

GEAR OIL SYN GL4 75W-85

HEAT TRANSFER OIL

INDUSTRIAL SYSTEM CIRCULATING OIL 32

INDUSTRIAL SYSTEM CIRCULATING OIL 46

INDUSTRIAL SYSTEM CIRCULATING OIL 68

Heat Transfer Oil VG 100

This is a heat transfer oil based on a specifically refined mineral oil with exceptional oxidation stability and very high resistance to thermal decomposition. It can also be used as a circulation oil VG 100 or thermal oil VG 100. 

Heat Transfer Oil VG 68

This is a heat transfer oil based on a specifically refined mineral oil with exceptional oxidation stability and very high resistance to thermal decomposition. It can also be used as a circulation oil VG 68 or thermal oil VG 68.
 

Heat Transfer Oil VG 46

This is a heat transfer oil based on a specifically refined mineral oil with exceptional oxidation stability and very high resistance to thermal decomposition. It can also be used as a circulation oil VG 46 or thermal oil VG 46.

Heat Transfer Oil VG 32

This is a heat transfer oil based on a specifically refined mineral oil with exceptional oxidation stability and very high resistance to thermal decomposition. It can also be used as a circulation oil VG 32 or thermal oil VG 32.

Hydraulic Oil VG 46

Our hydraulic oil VG 46 is specially formulated to deliver superior performance and protection for your hydraulic system. It has a high viscosity index, which means it maintains its viscosity across a wide range of temperatures, ensuring consistent performance even in extreme operating conditions.

Hydraulic VG 68

Our hydraulic oil VG 68 is specially formulated to deliver superior performance and protection for your hydraulic system. It has a high viscosity index, which means it maintains its viscosity across a wide range of temperatures, ensuring consistent performance even in extreme operating conditions.

Hydraulic AWS 100

Hydraulic AWS 46

System Oil SAE 30 TBN 5

System Oil SAE 20 TBN 5

Cylinder Oil SAE 50 TBN 100

Cylinder Oil SAE 50 TBN 55

Silicone Mold Oil(Form Oil)

Silicone mold oil is a specially formulated lubricant that is designed to ensure easy release of molds from silicone rubber. It is widely used in various industries, including food, medical, and aerospace, where precision is crucial. The silicone-based mold oil provides an excellent release of molded parts and components without affecting their surface finish or quality. 

Mould Oil (Pre-cast)

If you're in the precast concrete manufacturing industry, you know that having the right mold oil is crucial to producing high-quality products. Precasting mold oil, also known as release agent or casting lubricant, is a specialized lubricant that prevents concrete from sticking to the mold surface during the casting process. By applying a thin layer of mold oil before pouring the concrete, you can ensure easy removal of the cured concrete from the mold without damaging the mold itself.
  
  

MS Polymer Adhesive / Sealant

MS Polymer Adhesive / Sealant

MS Polymer Sealant - Low Modulus

 
 

Muscle Tech 4T 10W40 Semi Synthetic SN JASO MA2

Muscle Tech 4T Fully Synthetic 5W30 SN JASO MA2

Power Up Eco Tech 4T 10W30 SM JASO MA

Power Up Eco Tech 4T 20W40 SM JASO MA

RTV Silicone Gasket Maker

Blue RTV Silicone Gasket Maker

Copper RTV Silicone Gasket Maker

Clear Sealant

All Purpose Acetic Silicone Sealant

GP-General Purpose RTV Acetic Silicone Sealant

Multi-Purpose Acetic Silicone Sealant

Kitchen & Bathroom Sealant

SWPF STAMPING AND WIRE DRAWING OIL stands for Stamping Oil, Wire Drawing Oil, Punching Oil and Forming Oil which can be cross-used. It is a multipurpose oil for 4 types of applications.

STAMPING, WIRE DRAWING, PUNCHING, FORMING OIL VISC 100


STAMPING, WIRE DRAWING, PUNCHING, FORMING OIL VISC 68 (NON-FERROUS)


STAMPING, WIRE DRAWING, PUNCHING, FORMING OIL VISC 37 (NON-FERROUS)

STAMPING, WIRE DRAWING, PUNCHING, FORMING OIL SOLVENT BASED


100% RTV Acetic Silicone Sealant

Neat Cutting Oil

 
 



Switch to Mobile Version
Recent Updates
Subscribe Newsletter